Sliding window & door hardware

The hardware’s used in Sliding Doors & windows are

  1. Touch Lock:These are handles which
  1. Pop Up handle:This handle is used for Sliding Windows / Doors. The handle gets flushed in the sliding sash. The handle is used along with a Transmission gear / Espagonellete
  1. Sliding Handle:This handle is used for Sliding or Inward open Windows or out opening Doors.

The width of the handle is 27 mm. The handle is used along with a Transmission gear / Espagonellete

  1. Sliding Handle with Lock:This handle is used for Sliding or Inward open Windows or out opening Doors.

It has a lock & key built in the handle.

  1. D Type Handle
  1. Single Roller : The roller is made of Steel using needle bearing in the roller to ensure smooth functioning
  1. Double Roller: The roller is made from Zinc Alloy & copper using bearing in the roller to ensure smooth functioning & to take heavy loads
  1. Door Roller: These are Heavy Duty Door Rollers made from Copper and uses Heavy Ball bearing in the center the same ensures a very smooth sliding in the windows and doors and also can take heavy loads of Double Glass
  1. Sliding Gear:This is used in Sliding Windows & Doors. When the handle is locked the window is locked at 2 – 3points depending on the height of the window.

This makes the window much more secure & safe.Also this system ensures that the windows do not bend at top & bottom.

Copyright © 2015 plasowin.com All Rights Reserved.